COB LEDs

COB-LEDs (Chip-On-Board) are highly sophisticated and very efficient high-power LEDs. The extremely flat COB LEDs are unhoused directly bonded to a highly thermally conductive aluminum circuit board or ceramic board. The very compact and flat design of the COB LEDs leads to a very high light output / cm² and the effect that the chips are perceived as a common surface and not as points of light.

2700K - 6500K ✓ World's highest luminous efficacy ✓ Long life with MJT

Reset all filters [x]

Ascending

Descending

Hint: current revision of the supplier datasheet is applicable

Design-In Support

Do you have questions about our COB LEDs products or are you looking for alternatives? As an authorized distributor, we maintain a very close exchange with our manufacturers and will be happy to advise you on the selection of suitable components and possible adaptations with our many years of experience. Talk to us!

☎ +49 9135 7366665

Our COB LEDs-Manufacturer

Brochures, flyers and presentations

LED System House

PDF | Sites: 6 | 3.5 MB

Download

LED-Modules and -Systems

PDF | Sites: 16 | 3 MB

Download

LED Components

PDF | Sites: 12 | 3.1 MB

Download

Advantages of COB LEDs

Compared to conventional THT or SMD LEDs, COB LEDs offer a number of advantages:

Low failure rates due to fewer solder joints & thermal management
Homogeneous intensity distribution without optical hot spots
Better heat dissipation through lower thermal resistance

Very high luminous efficacy / cm²
Optimal combination with secondary optics
Better energy efficiency class

Low light loss
Higher viewing angle
Better color mixing

COB LEDs from Seoul Semiconductor with multi-junction LED technology

With patented Multi-Junction LED (MJT) technology, Seoul Semiconductor has launched a whole new generation of COB LEDs that divide the LED chips into several integrated cells. At 168 lm / W, Seoul Semiconductor's COB LEDs achieve the world's highest luminous efficacy. This high luminance is achieved with only 54 chips - conventional COB products require 144 chips for it. The decrease in the number of chips required in particular reduces the problems caused by wire connections (the main cause of defects in COB products) and thus prolongs their life.

Examples of use for chip-on-board LEDs

COB LEDs can be used in a wide variety of applications, especially in those where high quality and high efficiency are required. COB-LED modules are increasingly being used as a replacement for metal halide lamps in applications such as street lighting or indoor farming, but also in salesrooms.

Bei der Beleuchtung von Lagerhallen, Logistikhallen, Werkshallen und Produktionshallen werden häufig COB-LEDs verwendet.

Hall lighting

Beleuchtung von Krankenhäusern, Arztpraxen und Gesundheitszentren mit COB-LEDs.

Health service

Bessere Ausleuchtung von Verkaufsräumen und Austellungsräumen mit Chip-On-Board-LEDs.

Salesrooms

Auch im Büro und an Arbeitsplätzen spielen High-Power-LEDs eine wichtige Rolle.

Workplace lighting

Perfekte LED Beleuchtung für Wohnung und Haus.

Privat

Die hochentwickelte und effiziente COB-Technologie findet auch immer Einsatz zur Tunnelbeleuchtung zum Beispiel bei U-Bahn Haltestellen.

Tunnel lighting

Optimales Wachstum von Pflanzen mit COB LEDs in Gewächshäusern

Greenhouse lighting

Professioneller Einsatz von COB-LEDs in Decken- und Wandbeleuchtungen

Wall lighting

Moderne Anwendung von Chip-On-Board-LEDs in der Strassenbeleuchtung

Street lighting

Outdoor lighting

Effiziente Rast- und Tankstellenbeleuchtung mit der COB-Technologie

Gas stations

High Power Beleuchtung von Sportplätzen und Stadien mit Chip-on-Board-LEDs

Sports facilities

Manufacturer	Bridgelux
LED-series:	COB_E22
Color:	Natural White
CCT:	4000 K
CRI:	80
Luminous intensity typ.:	2057874 mcd
Luminous flux typ.:	6465 lm
Luminous efficiency typ.:	179 lm/W
Power typ.:	36,18 W
Vf typ.:	33,5 V
If:	1080 mA
If max.:	2880 mA
Viewing angle:	120 °
PPF:	-
Hi-Rel:	No
Chassis:	COB
Length:	28 mm
Width:	28 mm
Heigth:	1.4 mm
Min. operating temperature:	-40 °C
Max. operating temperature:	105 °C

Manufacturer	Bridgelux
LED-series:	COB_Vero29
Color:	Warm White
CCT:	1750 K
CRI:	80
Luminous intensity typ.:	2740966 mcd
Luminous flux typ.:	8611 lm
Luminous efficiency typ.:	92 lm/W
Power typ.:	93,60 W
Vf typ.:	52 V
If:	1800 mA
If max.:	3600 mA
Viewing angle:	120 °
PPF:	-
Hi-Rel:	No
Chassis:	-
Length:	-
Width:	-
Heigth:	-
Min. operating temperature:	-40 °C
Max. operating temperature:	105 °C

Manufacturer	Bridgelux
LED-series:	COB_Vero 29 SE
Color:	Warm White
CCT:	1750 K
CRI:	80
Luminous intensity typ.:	2734282 mcd
Luminous flux typ.:	8590 lm
Luminous efficiency typ.:	92 lm/W
Power typ.:	93,60 W
Vf typ.:	52 V
If:	1800 mA
If max.:	3600 mA
Viewing angle:	120 °
PPF:	-
Hi-Rel:	No
Chassis:	-
Length:	-
Width:	-
Heigth:	-
Min. operating temperature:	-40 °C
Max. operating temperature:	105 °C

Manufacturer	Bridgelux
LED-series:	COB_Vero29
Color:	Warm White
CCT:	1750 K
CRI:	80
Luminous intensity typ.:	3475307 mcd
Luminous flux typ.:	10918 lm
Luminous efficiency typ.:	92 lm/W
Power typ.:	118,67 W
Vf typ.:	69,4 V
If:	1710 mA
If max.:	3420 mA
Viewing angle:	120 °
PPF:	-
Hi-Rel:	No
Chassis:	-
Length:	-
Width:	-
Heigth:	-
Min. operating temperature:	-40 °C
Max. operating temperature:	105 °C

Manufacturer	Bridgelux
LED-series:	COB_Vero 29 SE
Color:	Warm White
CCT:	1750 K
CRI:	80
Luminous intensity typ.:	3466713 mcd
Luminous flux typ.:	10891 lm
Luminous efficiency typ.:	92 lm/W
Power typ.:	118,67 W
Vf typ.:	69,4 V
If:	1710 mA
If max.:	3420 mA
Viewing angle:	120 °
PPF:	-
Hi-Rel:	No
Chassis:	-
Length:	-
Width:	-
Heigth:	-
Min. operating temperature:	-40 °C
Max. operating temperature:	105 °C