Output Drivers

The output drivers from Espros are used for digital data communication in modern automation environments with long distances of up to one kilometre. Signal attenuation over the cable length and large capacitive loads have a large influence on the transmission. The output drivers from Espros provide universal low or high power output drivers for 24 volt interfaces. The devices can drive loads with 50mA at 30 Volt. At higher currents or higher voltages, the output drivers can drive external power transistors. The transistor is protected against overcurrent by the epc output driver.

	Product	Manufacturer	Vdd	Vout (max.)	Iout (max.)	Indicator Over Current	Chassis	Length	Width	Heigth	Min. operating temperature	Max. operating temperature

Note

Artikel	Manufacturer	Vdd	Vout (max.)	Iout (max.)	Indicator Over Current	Chassis	Length	Width	Heigth	Min. operating temperature	Max. operating temperature
EPC700-CSP6 Ausgangsschalter \| NPN \| Low Side	ESPROS Photonics Corporation	9,6 ... 30 VDC	30 VDC	50 mA	No	CSP6	1.39 mm	0.97 mm	0.46 mm	-40 °C	85 °C
EPC701-CSP6 Ausgangsschalter \| PNP \| High Side	ESPROS Photonics Corporation	9,6 ... 30 VDC	30 VDC	50 mA	No	CSP6	1.39 mm	0.97 mm	0.46 mm	-40 °C	85 °C
EPC702-CSP6 Ausgangsschalter \| NPN \| Low Side	ESPROS Photonics Corporation	9,6 ... 30 VDC	30 VDC	50 mA	Yes	CSP6	1.39 mm	0.97 mm	0.46 mm	-40 °C	85 °C

Hint: current revision of the supplier datasheet is applicable

Design-In Support

Do you have questions about our Output Drivers products or are you looking for alternatives? As an authorized distributor, we maintain a very close exchange with our manufacturers and will be happy to advise you on the selection of suitable components and possible adaptations with our many years of experience. Talk to us!

☎ +49 9135 7366665

Output Drivers

Design-In Support

Our Output Drivers-Manufacturer

Brochures, flyers and presentations